Sunday, November 24, 2013

Dom Santoli, #ForNico

Matt talks to Dom Santoli, former Bergen Catholic High School classmate, about the inspiring story of his son, Nico.  Nico was diagnosed in 2012 with unilateral retinoblastoma, a rare childhood cancer of the eyes.  Dom emotionally recounts the trying last year, as the family fought back against the cancer and created the #ForNico campaign, which brought awareness to the disease, and created success on social media, in fundraising, and in celebrity endorsements.

Check out this episode!

Friday, November 22, 2013

Ed Valentine, Big Blue View

Ed Valentine of Big Blue View ( joins the podcast to talk New York Giants, their season to date, the upcoming matchup with the Dallas Cowboys, and how he was able to turn running an online platform about the team into his day job.

Check out this episode!

Thursday, November 21, 2013

Mike Francesa Alex Rodriguez Interview Provides Showcase for Shure SM7B Microphone

A surprise happened yesterday - November 20th - for sports radio enthusiasts, particularly in the New York Metropolitan area.  All the sudden, Alex Rodriguez - the great, and undoubtedly tainted, baseball immortal - showed up in studio on the "Mike's On" Mike Francesa WFAN radio show.  Francesa is also simulcast around the country on the YES Network television channel.

This was radio tension at its finest.  You can listen to it here.  People can criticize Mike for not taking Alex Rodriguez to task in a more forceful manner; however, Rodriguez came to his show - no one else's - and Mike did ask him the hard questions, and Rodriguez emphatically denied each charge, including when asked if he has used performance enhancing drugs in the past few years (Rodriguez previously came clean about not playing clean in the early 2000s).  This was 40 minutes of must-listen and must-watch content.  I think I listened to or watched the interview in parts or in whole three times.  Sure, Francesa may have given a softer landing, but that is why Alex went there.  However you think about it, though, this was unprecedented radio.  I love podcasts, and this longform discussion had many of the best aspects of a podcast (including ultimately living afterwards on-demand), but this showed the power of live radio in-the-moment.

You can see parts of the interview here in Part 1 and here in Part 2.

With so many ears and eyes on this interview, this was a great showcase of one of the best and most cost-efficient broadcast microphones in the game, the Shure SM7B Vocal Dynamic Microphone, Cardioid. I know that only a podcaster or radio person would be thinking of this, but it bears mention.  These are the mics I utilize in my equipment setup.  What a great moment and unintended product placement.

 Alex Rodriguez finds soft landing at Mike Francesa’s WFAN studios Wednesday. YES NETWORK
(image from NY Daily News story)

Thursday, November 14, 2013

John Holl

John Holl joins the podcast to talk craft beer, food, and media! A journalist since 1996, John has worked as a reporter for the New York Times, the Newark Star-Ledger and the Indianapolis Star. In 2007 he dedicated his efforts to the full-time pursuit of covering the ever-growing American craft beer scene.

 Currently, John is the editor of All About Beer Magazine, and host of The Beer Briefing on iHeart Radio. He is a regular contributor to Beverage World Magazine, and TAPS. He is also the author of several books, including The American Craft Beer Cookbook (Storey Publishing, August 2013), Massachusetts Breweries (Stackpole Books 2012), and Indiana Breweries (Stackpole Books 2011).
John's Books:

The American Craft Beer Cookbook (

Massachusetts Breweries (

Indiana Breweries (

See more about John at

Check out this episode!

Tuesday, November 12, 2013

James McQueeny - Talking Healthcare

The future of Healthcare: the New "Heal"?  Matt talks with Jim about the problems with and what healthcare and wellness will mean to the future, both for our individual health and for the economy, entrepreneurship, and jobs.

Check out this episode!

Sunday, November 10, 2013

Jane Gagliardo, Sherry Blackman, Patrick Reilly, Melany McQueeny

Jane Gagliardo, Sherry Blackman, and Patrick Reilly join Melany and Matt for a longform discussion on their riveting book, "Call to Witness: One woman’s battle with disability, discrimination and a pharmaceutical powerhouse."

Get Call to Witness on Amazon!

Jane Gagliardo was a throwaway employee, fired after working nearly a decade for this leading vaccine maker when her disability surfaced. Fearless and impassioned, her story will leave readers empowered to stand up for themselves, even if it means standing alone. This 2002 landmark case changed the law and challenges the way corporations do business today. This riveting dramatic account sheds fascinating insight into the world of vaccine production, both past and present, that will have every reader searching through their immunization record—this corporation literally runs in the veins of millions of Americans.
A portion of the proceeds from the book go to Multiple Sclerosis research.

Check out this episode!

Also find the episode on iTunes, Stitcher, or your podcast directory of choice.

Thursday, November 7, 2013

Andrew Pangert

Matt talks to old friend Andrew Pangert about video gaming after the release of the newest "Call of Duty" game and "MexiCoke", the special mexican variety of Coca-Cola (get your mind out of the gutter!). Andrew has been an intense gamer from the time he was a youngster and gives perspective on the subject. The episode closes with a passionate conversation about podcasting and media.

Sunday, November 3, 2013

Orange is the New Black & Gravity

Matt McQueeny and wife Melany McQueeny talk about Netflix's Orange is the New Black and the movie Gravity.

Check out this episode!

Friday, November 1, 2013

Fethead vs. Cloudlifter & My Podcast Equipment

The Triton Audio Fethead and Cloudlifter are two preamp devices that come up a lot for podcasters searching for the best sound.

One reason is that many podcasters looking for a high-end microphone at a lower budget opt for the Shure SM7B, like me!  This is a great microphone, but has a very low base output (more on this later).  Another reason is that these preamp devices allow you to not go pedal-to-the-metal with your mixer or digital recorders' onboard preamps, which typically add a lot of noise the more you push to maximum.

I am no audio engineering expert, but in my zeal to launch the best podcast that I possibly can, I have learned a lot about how you create good sound and all the tricks that go into doing it at a somewhat modest price.

At heart, what the Fethead and Cloudlifter each do is add about 20-25 decibels of "clean gain" to your microphone's audio signal, before that signal even touches your mixer or digital recorder.  Again, they each add only pure, clean gain.  This is a great thing because you are not pushing your onboard preamps, giving them enough headroom to produce at a comfortable range.  We can push a car at 80 or 100 mph.  But the longer that you put it under that kind of stress, the more that can go wrong.  These gain preamps basically allow your car to go 80 mph but the car is only being stressed at the equivalent of 55 mph (or less).

My podcasting journey began with about 2-4 weeks of research and then a trip to the local music store.  I decided that I wanted a mixing board that would allow for at least a handful of microphones (using XLR inputs), inputs to allow "Mix-Minus" (Skype, Phone) guests, and the ability to play clips from a computer or iPad directly into the mix.  I also needed at least two basic microphones.

I came away from the music store with a Mackie PROFX 12 mixer, and two sets of Peavey's basic microphone and boom stand package.  Once hooked up, I was basically in business.  The mixer was able to handle the microphones and I could get a pretty decent sound.  The microphones are on the lower-end of quality and that would bear its head at times.  Particularly, when speaking too close, it picked up many of the breathing sounds and "pah" sounds that are inherent in speaking but are non-existent in much better mics.  My first podcast episode employed this setup.  The sound is not bad, though the mix will come across low (which is the fault of the producer - moi - learning to get the best sound in post-production).

The Mackie mixer has a USB out as well, but I have all recordings coming from the mixer going straight into a digital recorder, in my case the Edirol R-09HR (discontinued, but this is the current model).  This recorder allows you to record in MP3 format or all the way up to the highest audio quality WAV files.

After researching up on recording, I never even considered letting the feed go straight into the computer, because:

1) many podcasters with experience say that it is a good option until a computer crashes just once and you lose your whole episode.  A digital recorder is pretty much fail-safe.  It's also a more convenient traveling podcast partner than a computer.

2) many people say the Mackie mixer brings a hiss with it when recording through the USB.  I haven't even tried it, but I had read that.  Reason 1 should be enough to not, if you have the resources, record straight into the computer.

As the podcast bug continued to overtake my being, I decided I wanted to up my game in regards to the microphone.  In looking up mics (that are in the $200-$400 range), there are many that will absolutely excel in the job, but the two that were coming up a lot in my research were the Heil PR-40 (left) and the Shure SM7B (right).  They both appeared to be great microphones.  I chose the SM7B purely on preference, and because two of my favorite broad-pod-casters use them, Joe Rogan and Mike Francesa.  When you start podcasting, there is a certain vibe you want to put in place, and it is specific to you.  The Heil seems to be great, but I liked the Shure's look a lot better.  Again, just me.  My preference.

So, the day my two Shure SM7B's showed up at the house, I enthusiastically ran downstairs to the podcast lair to try them out.  Got one set up - it easily slotted into the boom stand I got with the Peavey set - and plugged the XLR in.  I turned the Mackie on, put the headphones in and on, and started talking!  And, nothing...  The sound was faint.  I was getting very concerned.  Then I looked deeper into the Shure SM7B manual, and noticed a small line at the end:

"The output level of the SM7B is -59dbV/Pa.  For typical speech applications, three inches from the grille, the SM7B requires at least +60 dB of gain at the microphone preamp.  Many modern microphone preamps, which are designed for the "hot" output level of condenser microphones, provide only 40 to 50 dB of game"

I felt like I got to the top of the modestly-expensive equipment mountain, and then fell all the way back down.  Here I am with an industry-leading microphone that looks cool and is used by many top-notch audio professionals, and what I am plugging it into, the really good mixer I just bought, can't actually handle it!?  From what I can tell, my Mackie provides up to 50 dB.  Oy vey...

So, late at night with my OCD tendencies in full effect, my Google searching commenced.  Recommendations for fixing my conundrum kept coming back to two devices: the Fethead and the Cloudlifter.  In Amazon, the Cloudlifter even will show up as an item "frequently bought with" the Shure SM7B.  The Fethead is not available in Amazon, so that is why it doesn't show up there too.

*NOTE: The Fethead is now available in Amazon.

I ended up purchasing two Fetheads for two reasons:

  • Each Fethead (below left) is $100, in comparison to the Cloudlifter CL-1 (below right), which is $150 apiece.
  • The Fethead device plugs directly into the base of your microphone, with an out that then plugs into a single XLR cable which goes to your mixer/digital audio player/digital audio workstation.  The Cloudlifter is a free-standing device with an in and and out, meaning you need two xlr cables.

The Fetheads were supposed to be delivered to my house on a Saturday, the same day I planned to do an important podcast with my Mom about adoption.  I was in the house and saw the mail truck outside, and didn't think anything of it.  I eventually went outside and saw a note that the package needed a signature.  Oh no!  The note also said I could pick it up on Monday.  Oh no!  I needed to do the episode with my Mom and was hoping to use the SM7Bs, which needed the Fetheads!  I ended up being able to get the Fetheads when the mail person returned to the post office (and before closing).  Victory!  We went home, plugged them in, and they were the key to bring the SM7Bs and their beautiful sound to life.  You can hear that episode here.  Because of the price point and the ability for the Fethead to tie right into the microphone without the need for an extra cable, I would vote Fet.

My next project to tackle was having the ability to do podcasts outside of the studio.  I live in far Northwest New Jersey and do not always have the ability to have people in studio.  I wanted to have a high-fidelity, mobile "studio" for on-the-road pods.

You can certainly use the Edirol and use the integrated microphones to pick up audio in a room.  This will have great sound, but also pick up a lot of background noise.  This episode was done with this method.

If possible, I wanted to be able to use Microphones too, which the Edirol does not really allow for.  This led me to the gold-standard for roadcasts, the Zoom H4N.  This baby has a phenomenal onboard microphone (which comes with a windscreen!)  and two XLR inputs on the bottom.  So, you can basically do a 3-person podcast with this if you wanted, where each live host/guest has a dedicated mic.

This podcast about Google Glass used the onboard microphone and another microphone plugged into the base.

This podcast about media consumption and the Economist used the two Peavey microphones plugged into the base (with a Cloudlifter CL-2 as a preamp).

How did the Cloudlifter sneak into the discussion, you ask?

With the Zoom H4N, I used my leftover (after the Shure SM7B purchases) original Peavey microphones as the road mics.  In order to get good levels with these mics, however, I was pushing the onboard preamp gain towards 85-95 out of 100.  Noise was entering the fray.  So, I decided I needed more clean gain preamplification. For the purposes of comparing the two titans of clean gain preamplification, this time I purchased the Cloudlifter.  When purchasing the CL-2, which comes with two mic inputs (whereas the CL-1 is a single input), you are actually realizing a bit of value: the CL-2 is $250 ($125 per input, in comparison to the $150 on the single-input CL-1).

When I received this device in the mail, I planned to plug it into the two Shure SM7Bs since they were in my stationary home studio and, with their extra XLR cable needs, would not have to be plugged and unplugged a lot, which could be an inconvenience in a more flexible road setup.  Moving the Fethead to the road mics would allow me to carry two less xlr cables.  But, the sound from the SM7Bs was horrendous, which was making me crazy.  There was SO MUCH noise, and the base sound was bad to boot.  Turned out it was the cheap XLR cables that came with my order.  Lesson: get good cables!  With good cables, all seems well.

So, this is my journey so far.  I feel very good about my equipment right now and for the foreseeable future.  I picked up two more SM7Bs for a fuller and more even-sounding large guest-list podcast.

In short, I do not see much difference between the Cloudlifter and the Fethead.  To me, it comes down to price and the efficiency of the Fethead needing just one cable - instead of two with the Cloudlifter - to get the job done.

*UPDATE* 11/4/13: I did some direct testing with one SM7B plugged into the Fethead and another plugged into the Cloudlifter.  They both went into the Mackie mixer and then to an Edirol digital recorder. I do not have tools or know how to exactly test this, but my strong impression was that the Fethead provided greater gain and a slightly better sound with this setup.  The Cloudlifter-powered SM7B sounded to me to be not as loud - when put to all of the same volume/gain settings in the Mackie - as the Fethead.